Australian Actuaries Climate Index component graphs and data

Explore interactive graphs which visually represent the Index data. You can also download the raw data.

Australian trees in the Australian bush

How to use the component graph and charts

  • Filter by Index or component type below
  • Select region to highlight index data for that area

Data breakdowns and definitions

Definitions, links, references and terms of use for the Australian Actuaries Climate Index.

Component definitions

There are six individual indices available which have been chosen for the impact and risk they pose to people and the economy. The indices are described in the table below.

Component

Description

High temperature

Monthly frequency of maximum and minimum temperatures above the 99th percentile.

Low temperature

Monthly frequency of maximum and minimum temperatures above the 1st percentile.

Precipitation

Monthly frequency of 5-day consecutive rainfall above the 99th percentile.

Wind

Monthly frequency of daily wind gust above the 99th percentile.

Consecutive dry days

Annual maximum consecutive dry days.

Sea level

Monthly mean sea surface height.

About the component definitions

Temperature



For the high temperature, the AACI measures the change in the proportion of days in a month on which the maximum and minimum temperatures exceed the 99th percentile of the reference period distribution for the relevant day. The results for the maximum and minimum temperatures are then averaged. The low temperature measure is calculated using a similar process by looking at the frequency above the 1st percentile. Both the high and low temperature components therefore record if there is a warming in temperature.

Precipitation



Extreme precipitation over short periods is a key driver of flood and storm damage. The rainfall component of the index focuses on extreme rainfall over a consecutive 5-day window.

Wind



During severe wind weather events such as storms and cyclones, it is the maximum wind gusts that are likely to lead to higher risk and damage. The wind component measures the monthly frequency of daily maximum wind gust above the 99th percentile.

Consecutive dry days



Consecutive dry days is included in the Index as an indication of drought conditions. It is defined as the number of consecutive days with less than 1mm of rain up to a maximum of 365 days. The cap is included for practical purposes and has no material impact on the Index.



Sea level


The sea level measure tracks movements in the monthly mean observed sea surface height, an important risk factor for coastal inundation.

Further information on component definitions is available in the  Design Documentation .

Links and references
Terms of use

This Australian Actuaries Climate Index (AACI) website is operated by the Institute of Actuaries of Australia (ABN 69 000 423 656).
Access to this website is conditional on acceptance of these terms of use.
Use of the website indicates your acceptance of these terms of use.


Disclaimer

  • Information provided in the AACI does not necessarily represent those of either the Institute of Actuaries of Australia (the 'Institute'), its members, directors, officers, employees, agents or that of the employers of aforementioned groups.
  • The Institute and the employers accept no responsibility, nor liability, for any action taken in respect of the information provided in the AACI.

View full website terms of use.

Data disclosure

Gridded data from the Copernicus Climate Data Store was relied on to construct the AACI.

While the reanalysis data from the CDS was reviewed for reasonableness, detailed analysis was not undertaken. Therefore, reliance was placed upon this source to provide accurate and complete data information.

More specifically:

  • The land-based components (temperature, rainfall and wind) use 11,154 gridded points at approximately 31 km intervals across Australia.
  • The sea-based component (sea level) uses 174 points within 3 kilometres of the coastline.
Region definitions

Results are available for Australia and for 12 climatologically consistent regions of Australia as shown below. These regions are based on CSIRO’s 15 sub-clusters used for their ‘Climate Change in Australia’ data, although clusters have been grouped where there is insufficient data for them to be assessed in isolation.

The CSIRO also do projections of future climate conditions at this region level and project similar metrics to the AACI. Consistency in region definitions means that it will be possible to do a direct comparison of historical observations to their future projections.

Map of Australia with different coloured sections to represent regions.

Map showing the 12 climatologically consistent regions of Australia.

Latest AACI articles

Questions? Comments? Want to get involved?

Contact us about the Australian Actuaries Climate Index today. We’d love to hear from you.

Farmer leaning against a tree in drought within viewfinder shape